Carli Suspension | 2003-2013 Dodge Ram 2500 / 2003-2012 3500 Diesel Dominator Shock Package - 6 Inch Lift
Carli Suspension | 2003-2013 Dodge Ram 2500 / 2003-2012 3500 Diesel Dominator Shock Package - 6 Inch Lift
SKU: CS-DD30SPKG-03-6-D
- King 3.0" Remote Reservoir Shocks with 17-4 Stainless Steel Shock Shafts
- Includes Front and Rear Shocks, Short Reservoir Mounts, and Limit Straps
- Requires CS-DFST475 Shock Tower, CS-D30GUSSET Gusset Kit and Upper and Lower Coil Buckets Bored to 4.5"
- Fitment - 2003-2012 Ram 2500/3500 4x4, Diesel
- Compatible ONLY with Carli 6" Front Springs & 4" Rear Lift
NOTE: Shock Towers and Rear Crossmember Gussets Required to install. Coil Buckets MUST also be bored to 4.5″ upper and lower. Both Axle Truss and Rear Shock Mounts HIGHLY Recommended.
The Dominator boasts front Carli Signature tuned, King 3.0” remote reservoir shocks so large, we needed bore the factory spring buckets for them to cycle properly. We include rear piggy-back 3.0″ shocks to match the fronts. As the old adage goes, there’s no replacement for displacement. In an effort to provide customers with the best product, we do not sell off-the-shelf King 3.0s. We designed a custom piston to determine proper base flow rates to ensure the shock works well in the heavy-duty truck platform; we then tuned the shocks around the custom pistons based on seat-of-the-pants feel. We round off ALL our King shocks with shafts machined and polished from a solid piece of 17-4 Stainless. Unlike King’s standard shafts, there is no coating to wear off, weather is far less likely to hurt them and if there is a small chip, you can round the edges with emery cloth to ensure the seal housing isn’t damaged as they’re not brittle like the stock, hardened shafts. All King shocks are built with a plated steel body. If subjected to inclement weather for extended periods, we recommend wrapping your shocks in 3M to provide a moisture barrier that’s replaceable.
NOTE: Shock Towers are required to install. Additionally, the Upper and Lower front spring buckets will need to be bored to 4.5″ and rear shock cross member will need to be clearances and plated with the Carli Gusset Kit.
Addition Fabricated Axle Truss and Rear Shock Mounts are HIGHLY recommended.
DOES NOT fit 2013 Dodge Ram 3500
Original: $4,887.00
-65%$4,887.00
$1,710.45
Description
SKU: CS-DD30SPKG-03-6-D
- King 3.0" Remote Reservoir Shocks with 17-4 Stainless Steel Shock Shafts
- Includes Front and Rear Shocks, Short Reservoir Mounts, and Limit Straps
- Requires CS-DFST475 Shock Tower, CS-D30GUSSET Gusset Kit and Upper and Lower Coil Buckets Bored to 4.5"
- Fitment - 2003-2012 Ram 2500/3500 4x4, Diesel
- Compatible ONLY with Carli 6" Front Springs & 4" Rear Lift
NOTE: Shock Towers and Rear Crossmember Gussets Required to install. Coil Buckets MUST also be bored to 4.5″ upper and lower. Both Axle Truss and Rear Shock Mounts HIGHLY Recommended.
The Dominator boasts front Carli Signature tuned, King 3.0” remote reservoir shocks so large, we needed bore the factory spring buckets for them to cycle properly. We include rear piggy-back 3.0″ shocks to match the fronts. As the old adage goes, there’s no replacement for displacement. In an effort to provide customers with the best product, we do not sell off-the-shelf King 3.0s. We designed a custom piston to determine proper base flow rates to ensure the shock works well in the heavy-duty truck platform; we then tuned the shocks around the custom pistons based on seat-of-the-pants feel. We round off ALL our King shocks with shafts machined and polished from a solid piece of 17-4 Stainless. Unlike King’s standard shafts, there is no coating to wear off, weather is far less likely to hurt them and if there is a small chip, you can round the edges with emery cloth to ensure the seal housing isn’t damaged as they’re not brittle like the stock, hardened shafts. All King shocks are built with a plated steel body. If subjected to inclement weather for extended periods, we recommend wrapping your shocks in 3M to provide a moisture barrier that’s replaceable.
NOTE: Shock Towers are required to install. Additionally, the Upper and Lower front spring buckets will need to be bored to 4.5″ and rear shock cross member will need to be clearances and plated with the Carli Gusset Kit.
Addition Fabricated Axle Truss and Rear Shock Mounts are HIGHLY recommended.
DOES NOT fit 2013 Dodge Ram 3500
